Glass cutting machine repair glass technology how to do it! Let's get together and get to know. Using glass repair technology, first of all, according to the size of the scar on the top of the glass to carry out preliminary treatment work, first of all, the air in the damaged area of the glass should be extracted, only in this way can the repair work be guaranteed not to be affected, but also to better ensure the quality of repair.

    But if we want to extract the air from the damaged glass, we must make the glass in a vacuum state. If the glass cutter wants to reach the vacuum state, there will be negative pressure in the process. If we do not pay attention to the speed, it is likely to reach the negative pressure state in an instant, so as to guide the glass. It is impossible for the work to be carried out, so be careful and take your time when pumping air. This is also to better protect the internal structure of glass from being affected. Often this process takes about 10 minutes, so from this process, just pay attention to the glass situation.

    After the air in the damaged glass area is completely extracted, the next step can be done. What we need to do in this link is to inject a certain resin repair fluid into the damaged glass area. This repair fluid can protect, repair and beautify the damaged glass area, but it can inject the repair fluid into the damaged glass area. When you have to pay attention to not too hard, and can not be too anxious, in order to avoid damage. If the glass is damaged in a large area, we should pay attention to it. We can add a certain amount of resin repair solution, which can play a better role.

     After the resin repair solution is filled, the glass breakage area will be improved to a certain extent. If you want to be beautiful, you can try to put another layer of beautifying and protecting glass on the glass, which can better protect the glass, but also to better avoid the secondary breakage of the glass breakage area.