What should be paid attention to in the operation of second-hand glass tempering furnace? Foshan Jingling Glass Machinery Co., Ltd. gives a brief introduction to users through the following articles in view of these aspects:

1. the performance of the equipment can provide excellent guidance for chemical strengthening glass production process, adjustable high and low stress, save a lot of process experiment time for manufacturers, and direct production can create unlimited profit space for you in the shortest time! Our company provides high-quality catalysts all the year round. Chemical toughened glass is based on the original ion diffusion machine. It is used to change the surface composition of glass so as to form a compressive stress layer on the surface of glass. Its main characteristics are high strength, good thermal stability, smooth glass surface, no deformation, cutting, no self-explosion, especially suitable for tempering of ultra-thin glass in various shapes.

2. main technical parameters and dimensions of second-hand glass tempering furnace equipment: equipment suitable for size can be designed according to customer requirements for glass thickness processing: 0.4-12 mm working temperature: 450 design temperature: 500 temperature control accuracy: working medium: potassium salt and additive heating power: 74 kw.

3. Mechanical properties of second-hand FRP tempering furnace equipment The reciprocating speed of the preheating furnace is 3000mm/min, which ensures the uniform and stable speed; The lifting speed of the hanging rail is 2000mm/min, which is stable and no jump; The heater and the thermoelectric corner can be replaced; During the continuous use of the equipment, the heat-resistant circulating fan and stainless steel impeller are used in the heat balance system whose surface temperature does not exceed 55 C. The air duct is a high-density insulation board to ensure uniform preheating and annealing temperature; the protection level of the thermal circulating fan is ip55; the preheating furnace is a track pushing structure, and the travel time is less than 5 minutes; the exhaust device of the preheating furnace is used to discharge the gas contaminating the glass surface during annealing and shorten the annealing time;

4. Electrical performance of equipment can be cut off by emergency shutdown switch under any circumstances; PLC microcomputer program control, touch screen display parameters; temperature measurement at upper, middle and lower points of exchange furnace to ensure uniform temperature during replacement process, thereby ensuring processing quality; overheating protection function of heater to ensure that heater does not exceed design temperature; Temperature control points are set in the air duct of the hot stove to set and control the preheating and annealing temperatures, and display the actual temperature at any time; travel control enables the preheating stove to move and hanging rails to automatically locate, and has the function of over-limit protection; acoustic and optical alarm for overheating of the furnace temperature and electrical faults.

5. Safety performance of second-hand FRP tempering furnace equipment The design safety factor of supporting beam and lifting mechanism of preheating furnace meets ISO standard; Overheat protection function and alarm function of furnace temperature; Over-limit protection function of walking and long-drop mechanism of preheating furnace; Technical parameters and productivity of equipment: number of hangers: 2; dimension of hanger.